Caen SY 2527 User Manual Download

Page: 44 / 84

Document type:

Title:

Revision date:

Revision:

User's Manual (MUT)

Mod. SY2527, Universal Multichannel Power Supply System

27/11/2000

NPO:

Filename:

Number of pages:

Page:

00103/97:2527y.MUTx/00

SY2527USERMANUAL_REV0.DOC

7.1.4

Welcome Window

The

Welcome

Window

which appears as the system is powered On is shown in Fig.

7.3.

Fig. 7.3 – Welcome Screen in Standalone Operation

7.1.5

Login Window

The

Login Window

is shown in Fig. 7.4.

In order to access the following

Start Up Window

, type the

Username

and the relevant

Password

in the relevant fields and then press ENTER (ACK key on the keypad).

Presently, only a limited number of usernames and relevant passwords are accepted by
the software. Refer to § 10.1 for a complete list of them and information about the
relevant access level.

NOTICE!

PRESENTLY, THERE IS A LIMITED NUMBER OF ACCEPTED INPUTS. PLEASE

REFER TO § 10.1 FOR A COMPLETE LIST OF THEM.

Summary of Contents for SY 2527





















































































Search results

Summary of Contents for SY 2527

Reviews:

Related manuals for SY 2527

Brands by name

Popular brands

Caen SY 2527, User Manual

Search results

Summary of Contents for SY 2527

Reviews:

Related manuals for SY 2527

Brands by name

Popular brands