Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. SY2527, Universal Multichannel Power Supply System
27/11/2000
0
NPO:
Filename:
Number of pages:
Page:
00103/97:2527y.MUTx/00
SY2527USERMANUAL_REV0.DOC
84
37
6.2
Ethernet interface (TCP/IP protocol)
The Ethernet connector provided with the system is a 10baseT connector and can be
used to interface the SY2527 system to an Ethernet LAN. This allows the system control
via an external standard IBM
TM
Personal Computer running a Telnet Client terminal
emulator program (
Remote operation via terminal using the TCP/IP protocol
, see § 7.2.3)
or to a computer connected to a TCP/IP network (INTERNET/INTRANET) and running a
custom-developed program (
Remote operation via host computer using the TCP/IP
protocol
).
6.2.1
Configuring the SY 2527 System for network connection
Before establishing a connection to a TCP/IP network, a specific IP Address, IP Net
Mask must be assigned by the local Network Administrator to the SY 2527 System.
The default settings of the TCP/IP protocol for the SY 2527 System are as listed in Table
6.2: the default settings correspond to the network connection inactive.
Table 6.2 – TCP/IP Protocol Default Settings
IP Address
0.0.0.0
IP Net Mask
0.0.0.0
Gateway
0.0.0.0
Default TCP/IP settings can be modified by the User in the Start Up Window selecting:
Set-Up Menu
à
à
Communications
à
à
TCP/IP settings
Refer to § 7.1.23 for further details. An example of possible TCP/IP settings is listed in
the table below.
Table 6.3 – An example of TCP/IP Protocol Settings
IP Address
192.9.200.1
IP Net Mask
255.255.255.0
Gateway
0.0.0.0
If the User needs to connect to the SY 2527 system from outside the local network, a
Gateway address has to be specified in the TCP/IP settings.
6.2.2
Configuring the host PC
To configure the TCP/IP parameters of the host PC with Windows 9x select:
Start
à
à
Settings
à
à
Control Panel
