Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. SY2527, Universal Multichannel Power Supply System
27/11/2000
0
NPO:
Filename:
Number of pages:
Page:
00103/97:2527y.MUTx/00
SY2527USERMANUAL_REV0.DOC
84
56
display the Channels Window for the selected group; if it does not yet exist, the
software will directly display the
Add Channels
pop-up window (Fig. 7.11);
2. Select
Add Channels
(if not yet displayed) from the
Groups
Menu
: a pop-up
window will show a list containing all the channels which are NOT included in the
current group;
3. Select the channel you want to add to the group, if any, and press SPACEBAR to
select it;
4. Repeat point 3. for each channel you want to add to the current group;
5. Press TAB key and select OK or CANCEL to confirm the channel selection you have
made or to cancel it;
6. Select
Remove Channels Window
(Fig. 7.12): a pop-up window will show a list
containing all the channels which are already included in the current group;
7. Select the channel you want to remove from the group, if any, and press
SPACEBAR to select it;
8. Repeat point 6. for each channel you want to remove from the current group;
9. Press TAB key and select OK or CANCEL to confirm the channel selection you have
made or to cancel it.
Please note that both the
Add Channels
and
Remove Channels
affect only the group
which is displayed on the screen.
Fig. 7.11 – Add Channels pop-up Window
