CAB Tharo Apollo 4 Operator'S Manual Download

Page: 62 / 118

cab - Produkttechnik GmbH / Tharo Systems, Inc.

Fig. 9 p Copy memory card

Copy Memory Card

The "Copy memory card" facility may be used to copy information from one

memory card, for instance PC card, PCMCIA card, etc., onto another one.

Before starting the duplication, the source card has to be installed.

The duplication is carried out file by file. This allows the usage of memory

cards with different capacities.

When the duplicate card cannot store any more information the display shows

"Card full".

If data with a capacity of more than 1Megabyte has to be copied, the

duplication process will be divided into several cycles. Alternately, the printer

display will ask to insert either the source card or the duplicate card.

15 Backfeed

Selection

Insert card

to be copied

yes

14 Copy memory card

13 Format card

Copy emory card

Yes

Copy memory card

Insert dest.

Insert source

card

Copy memory card

Insert source

All files

copied ?

Summary of Contents for Tharo Apollo 4























































































































Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands

CAB Tharo Apollo 4, Operator'S Manual

Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands