CAB Tharo Apollo 4 Operator'S Manual Download

Page: 44 / 118

cab - Produkttechnik GmbH / Tharo Systems, Inc.

ONL key

Switch into OFFLINE mode.

FF key

For scrolling down within the file list stored on the card.

Reduces the quantity of labels to be printed.

CAN key

For scrolling up within the file list of the card.

Increases the quantity of labels to be printed.

PSE key

Confirms file selection.

Moves the cursor to the right when setting the quantity of labels

to print.

Switch into PRINT mode.

Table 8 k Function keys in the LABEL FROM CARD mode

System Mode LABEL FROM CARD

Provided that a memory card is installed and a label format is present, in

OFFLINE mode, press the

key to enter the LABEL FROM CARD mode.

In this mode, the labels stored on the card can be selected to print; for files

with a variable number of labels the quantity of labels to be printed can be set.

Display

The top line of the display shows "Label from card". The bottom line of the

display shows the file name of the first label file in the list stored on the card.

After the requested label has been selected, for files without a fixed number of

labels the display shows "No. of labels" in the top line and "00001" in the

bottom line.

LED Display

All LED's off.

Function keys

Summary of Contents for Tharo Apollo 4























































































































Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands

CAB Tharo Apollo 4, Operator'S Manual

Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands