CAB Tharo Apollo 4, Operator'S Manual

Page: 18 / 118

18 cab - Produkttechnik GmbH / Tharo Systems, Inc.
Table 1 Label formats in inches (figures in brackets are in mm)
* ... Apollo 4/200C and Apollo 4/300C only
E
F
D
A
B
K
I
C
G
H
L
M
Label/ Tag Media Specifications
Label and tag media to be used for the Apollo 4 can be found in the table
below. Note this information before ordering your labels.
Fig. 1 Label formats
Item MINIMUM MAXIMUM
A Label width 1 (25) 4.6 (116)
B Width of silicon liner 1 (25) 4.6 (116)
C Label length Apollo 4/200(C) .2 (5) 37.2 (945)
Apollo 4/300(C) .2 (5) 16.8 (427)
D Gap between labels Apollo 4/200(C) .08 (2) 37.2 (945)
Apollo 4/300(C) .08 (2) 16.8 (427)
E Label thickness .0024 (.06) .01 (.25)
F Thickness of silicon liner .0024 (.06) .01 (.25)
G Distance of the first printing position
from the edge of the silicon liner .08 (2)
H Distance of the label sensor
from the edge of the silicon liner .7 (17.5)
I Width of punch hole .2 (5) -
K Height of punch hole .08 (2) .2 (5)
L* Width of reflective mark .2 (5) -
M* Height of reflective mark .08 (2) .2 (5)