CAB Tharo Apollo 4, Operator'S Manual

Page: 55 / 118

55 cab - Produkttechnik GmbH / Tharo Systems, Inc.
F
Printhead Position
The "Printhead position" parameter defines the location of the print image on
the label. The parameter should especially be altered if you are using the same
label formats on several printers, and you find the print image located
differently on the labels when they were printed on another printer. (range from
-.33 to +.33 in or -8.4 mm to +8.4 mm). If the printhead position value is
positive, the print image is shifted further to the rear edge of the label.
Attention ! A change of the printhead position value influences the tear-off
and the cut position. For that reason alter the values of the parameters
"Peel position" and "Cut position" by the same amount like the
"Printhead position" but in the opposite direction.
Adjustments for various print jobs may also be carried out via software which
provides an additional offset value. Any front panel value and software
command value are totaled together for printing.
The current field to be changed is flashing.
6 Peel position
8 Heat level
7 Printhead pos.
Printhead pos.
+ x.x mm
Printhead pos.
- x.x mm
Printhead pos.
± 9.x mm
Printhead pos.
± 0.x mm
Printhead pos.
± x.9 mm
Printhead pos.
± x.0 mm
*
*
*
*
*
*
Printhead pos.
± x.x mm Yes
Printhead pos.
± x.x mm No
Confirmation
Sign (+ or -)
1/10 mm
mm
Fig. 9 h Set "Printhead position" parameter