CAB Tharo Apollo 4, Operator'S Manual

Page: 81 / 118

81 cab - Produkttechnik GmbH /Tharo Systems, Inc.
Key Assignment
The Apollo 4 can easily be adjusted to the keyboard configuration of the
particular country by using the setup parameter "Country". For each of the
available settings the Apollo 4 has a different table of key assignment, which,
generally, complies with the assignment under Microsoft DOS.
The [ALTGR] key has no function. Therefore, all signs which are located on
the right hand side of the key opposite of the normal characters (e.g. { } [ ] \)
can be generated by pressing the [ALT] key. A few of the other special signs
(e.g. ¨ × ÷) may also be generated the same way. (see Appendix A Table A-3a)
Other special characters (e.g. ñ ç œ) can be generated by inserting two
characters one after the other, where the second input is a combination with
the [ALT] key. (see Appendix A Table A-3b)
Some of the special characters cannot be shown in the display of the printer. In
that case, the Apollo 4 will use a character which looks similar to the required
character.
When using a scanner, the character set of the scanner has to be the same as
used by the Apollo 4 .
Special Key Functions
[F1] To enter the list of labels stored on the memory card.
[F2] To repeat the print of the last label. (as command A 1 CR)
[F3] To repeat the print of the last label including a new enquiry for variable data.
[Shift]+[F5] To start the monitor mode/ASCII dump mode.
[Shift]+[F6] To start the self test printout.
[F7] Printer Info Display
[F8] Form feed
[ENTER] or Without a current print job : to switch between ONLINE and OFFLINE;
[RETURN] While processing a print job : to confirm the data input.
[ESC] To cancel the data input.
(while printing same effect as CANCEL)
[SPACE] While printing same effect as PAUSE.
[Shift]+[Del] To delete the input line.
[ á ] , [ â ] To scroll up/down the list of labels on the memory card.
F