CAB Tharo Apollo 4 Operator'S Manual Download

Page: 56 / 118

cab - Produkttechnik GmbH / Tharo Systems, Inc.

Heat Level

The parameter "Heat level" enables the printer to adapt to possible differences

in the thermal properties of different printheads.

The parameter scale is from -9 to +9.

A previous adjustment has already been carried out in the factory.

In the event of replacing the printhead, the setting possibly has to be adjusted.

To adjust the printer to current print jobs, it is recommended that you alter the

heat level parameter via software. (e.g. for different material and speed)

Any front panel value and software command value are totaled together for

printing.

The current field to be changed is flashing in the display.

Fig. 9 i Set "Heat level" parameter

Heat level

+ x
Heat level

- x

Heat level

± 9

Heat level

± 0

Heat level

± x

Yes

Heat level

± x

Confirmation

Sign (+ or -)

8 Heat level

9 Printer info

Heat level

7 Printhead pos.

Summary of Contents for Tharo Apollo 4























































































































Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands

CAB Tharo Apollo 4, Operator'S Manual

Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands