CAB Tharo Apollo 4, Operator'S Manual

Page: 28 / 118

28 cab - Produkttechnik GmbH / Tharo Systems, Inc.
F
Loading Labels
Fig. 6b Loading labels (Apollo 4/200, Apollo 4/300)
1. Lift the printhead ( 10 ) by rotating the lever ( 1 ) clockwise until it stops.
2. Loosen the media retainer knurled screw ( 5 ) and swing the media retainer
( 4 ) counterclockwise.
3. Place the label roll ( 2 ) onto the media hub ( 3 ).
The solid line represents the feed path of outside-rolled labels, the broken
line of inside-rolled labels. The broken-dotted line shows the media path of
fanfold paper ( 6 ).
4. Swing the media retainer ( 4 ) clockwise to the media hub ( 3 ) and push it
inwards until it rests against the side of the label roll.
Tighten the knurled screw ( 5 ).
5. Slide the media guide ( 7 ) into its outermost position.
6. Unroll a length of label stock from the media roll and feed it through as
shown in Figure 6 b/c.
It is particularly important to ensure that the media strip slides properly
between the fittings of the adjustable photocell assembly ( 9 ).
7. Slide the media strip right through the space between the print roller and
the printhead.
10
1 2 3 4 5
6 7 8 9