CAB Tharo Apollo 4 Operator'S Manual Download

Page: 33 / 118

cab - Produkttechnik GmbH / Tharo Systems, Inc.

8 Control Panel

The front control panel of the Apollo is fitted with 4 function keys with indicator

LEDs, and a 2x16 character digital LCD display.

Fig. 8 Front control panel

The control panel display constantly provides the operator with the actual

information concerning the current printer mode and label processing. The

indicator LEDs support the information shown in the display by indicating which

keys have to be pressed. (e.g. in the event of a fault)

On the following pages, you will find descriptions of the system modes of the

Apollo 4

, the related indications by the LCD display and the LEDs as well as a

description of the function keys under differing conditions.

Summary of Contents for Tharo Apollo 4























































































































Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands

CAB Tharo Apollo 4, Operator'S Manual

Search results

Summary of Contents for Tharo Apollo 4

Reviews:

Related manuals for Tharo Apollo 4

Brands by name

Popular brands