47
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
16
4
17 13
18
Fig. 7f Loading Labels from Roll in Rewind Mode
7. Media Loading
12. In rewind mode, the rewind guide plate (
16
) must be mounted.
Remove the labels from the first 4 in (100mm) of the label strip.
Then, slide the media strip (
4
) around the rewind guide plate (
16
) to the
internal rewind hub (
13
) as shown in figure 7f. Slide the strip under the
clamps (
17
) that are located on the internal rewind hub (
13
). Hold the
internal rewind hub (
13
) and rotate the nut (
18
) counter-clockwise until it is
tight. The media strip will now be fastened to the internal rewind hub (
13
).
Rotate the internal rewind hub (
13
) counter-clockwise to tighten the media
strip.
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
