45
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
13
Fig. 7d Feed path in Tear-off Mode
8. Slide the media guide ring (
6
) inward until it lightly touches the side of the
media strip.
7. Media Loading
4. Swing the media retainer (
11
) downwards until it touches the media hub
(
9
). Push the media retainer against the supply role until it rests against
the label media. Tighten the knurled screw (
10
).
5. Raise the printhead assembly (
2
) by rotating the lever (
7
) clockwise until it
stops.
6. Slide the media guide ring (
6
) outward, allowing enough clearance for the
label stock's width when loaded.
7. Slide the media strip underneath the swing (
5 /A3-2
and
A3
: axle) and
through the adjustable photocell assembly (
3
) until it comes out of the
front of the printer. If you are using labels that are wound-in, please make
sure that you slide the media strip over the internal rewind hub (
13
).
In figure 7d the feed path for labels wound-out is represented by a solid
line, and the feed path for wound-in labels is represented by a broken line.
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
