44
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
1
2
3
4
8
9
10
11
12
7. Media Loading
Loading Labels
Fig. 7c Label Loading in Tear-off Mode
1. Open the cover (
1
).
2. Loosen the knurled screw (
10
), swing the media retainer (
11
) upwards and
slide it out as far as possible.
If you are using material with the same width as the previous material, just
swing the media retainer (
11
) upwards.
3. Place the media roll (
8
) onto the media hub (
9
) and unwind a strip of
media (
4
) from the roll. When operating in the rewind or peel-off mode
make sure that the strip is long enough to reach the internal rewinder by
guiding the strip through the whole print mechanism and underneath of it.
Make sure that the labels between the media hub and the print
mechanism are facing up. Slide the roll onto the media hub (
9
) until its
stops.
Loading Labels from Roll
5
6
7
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
