43
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Preparation for Tear-Off Mode / Rewind Mode
The
R-version
printers are delivered with the rewind guide plate (
1
) mounted
for operation in rewind mode. With the optional tear-off plate the printer also
may be operated in tear-off mode. For this purpose the rewind guide plate (
1
)
must be replaced by the tear-off plate (
3
).
The
P-version
printers are prepared for the dispense mode. After mounting the
optional tear-off or rewind guide plate the printers also may be operated in tear-
off or rewind mode.
7. Media Loading
Fig. 7b Exchange Rewind Guide Plate / Tear-Off Plate
The exchange of the different plates can be made in a similar way as the
exchange rewind guide plate / tear-off plate :
1. Open the cover.
2. Loosen the two screws (
2
).
3. Slide the rewind guide plate (
1
) to the right as far as possible to remove the
plate from the printer.
4. Place the slotted holes on the tear-off plate (
3
) over the screws (
2
) on the
front of the printer and slide the plate to the left until it stops.
5. Tighten the two screws (
2
).
2
2
3
1
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
