F-3
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Error Messages During the Firmware Update
In the event an error occurs during the updating process, the error code will be
displayed on the LCD:
'C' :
Check sum error (possibly "/b" missing in COPY command or
a corrupt firmware file)
'H' :
Header fault (possibly "/b" missing in COPY command or a
corrupt firmware file)
'E' :
EPROM could not be erased
'V' :
Programming voltage too low
'P' :
Programming fault
NOTICE !
If any one of the faults described above occurs, the previous firmware
setting is invalid and the update has to be started again. In some special
cases, it is possible that the printer will not return to normal operation
mode after powering on after a failed firmware update. In this case,
upload a previous firmware file over the parallel interface after powering
on.
Appendix F - Firmware Updates
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
