CAB a3-2, Operator'S Manual

Page: 42 / 138

42 cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
1 2
7. Media Loading
General Information
1. Pay attention to the specifications of the material indicated in chapter 1 .
2. When using the printer for the first time or using label media with a different
width, make sure to adjust the printhead support as well as the position of
the label edge sensor.
3. There are warning labels on the media hub and on the ribbon supply hub
which will be visible if the material is getting low. When these warning
labels are visible, prepare to replace the material soon.
1 - Warning label "End of Ribbon"
2 - Warning label "End of Paper"
4. If you do not use the printer for an extended period of time, lift the printhead
to avoid possible flattening of the print roller.
5. If you want to move or ship the printer to another location, remove the
media and the ribbon from the printer.
Fig. 7a Warning labels
7. Media Loading