CAB a3-2, Operator'S Manual

Page: 16 / 138

16 cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Options
External Media Unwinder/Rewinder
For operating large print jobs, external unwinders and rewinders are available
to handle big label rolls :
A3-2 A3 A4 A6
Ext. Rewinder ER1 (up to diam. 8.3in/210mm) x x x -
Ext. Rewinder ER2 (up to diam. 8.3in/210mm) - - - x
Ext. Rewinder ER4 (up to diam. 11.8in/300mm) x x x -
Ext. Rewinder ER6 (up to diam. 11.8in/300mm) - - - x
Ext. Unwinder EU4 (up to diam. 11.8in/300mm) x x x -
Ext. Unwinder EU6 (up to diam. 11.8in/300mm) - - - x
Cutter Unit
With the cutter unit installed, labels or continuous media may be cut when
desired. Cutter options include a choice of: after each label, after a specific
quantity of labels, or at the end of a print job. For cutter operation, the printer
firmware will extend the label for cutting based on specified displacements,
then automatically backfeed the label, so that after making a cut, the label roll
will be repositioned and ready for printing the next label.
The cutter is powered directly by the printers peripheral connector.
A3-2 A3 A4 A6
Cutter CU2 x - - -
Cutter CU4 - x x -
Cutter CU6 - - - x
Memory Card
The printer includes an option for using memory cards in order to permanently
store graphics, fonts or whole label formats. The data can be downloaded via
any of the printers data interfaces. CompactFlash Type 1 cards with a
maximum capacity of 512 MB are accepted. Using a memory card, the printer
can be operated without being connected to a computer which represents a
great advantage regarding the flexibility.
1. Product Description