CAB a3-2 Operator'S Manual Download

Page: 132 / 138

F-2

cab Produkttechnik GmbH & Co KG

A3-2 / A3 / A4 / A6

Appendix F - Firmware Updates

Firmware Update from Memory Card

Preparing the Memory Card

1. Format a CompactFlash Card in the printer using the command "Format

Card" in the Offline menu.

That way the directories "fonts", "images", "labels" and "misc" are installed

on the memory card.

2. Insert the formatted card in to a CompactFlash drive of a PC and copy a

firmware file to the directory "misc".

Firmware Update

1. Insert the memory card with the firmware file in to the slot of the printer.

2. Switch from "Online" mode to the Offline Menu by pressing the

key.

3. Press the key or the key until the "Service" menu is displayed.

Press the key to confirm the selection.

4. The display shows "Firmware upd.". Press the key.

Press the key or the key until "Firmw. fr. card" is displayed. Press
the key.

5. If the "Firmware update" option is protected by a PIN, "PIN: 0000" will

appear on the display. The numbers of the PIN may be changed
individually using the key and the key. The number to be changed

will be flashing on the display. You can switch to the next number by
pressing the key. If the input of all numbers is correct, the access to

the "Firmware update" option is made possible.

6. In the second line of the display the name of the firmware file (e.g.

294_4830) is shown.
If there are several firmware files on the memory card, press the key or
the key to select a file. Confirm the selection by pressing the key.

7. The selected firmware file is copied. During the firmware upload, the

printer's LCD will indicate the progress with a progress bar. After
completing the update process, the LCD will display "OK ". This

indicates the completion of the updating.

8. Press the key and the printer returns to "Online" mode.

Summary of Contents for a3-2











































































































































Search results

Summary of Contents for a3-2

Reviews:

Related manuals for a3-2

Brands by name

Popular brands

CAB a3-2, Operator'S Manual

Search results

Summary of Contents for a3-2

Reviews:

Related manuals for a3-2

Brands by name

Popular brands