C2R 30-005, User Manual

Page: 75 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved
75
Rev. A
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You may either
transmit, or not transmit Start/Stop characters. Default = Don’t Transmit.
Codabar Check Character
Codabar check characters
are created using different “modulos.” You can program the imager
to read only Codabar bar codes with Modulo 16 check characters. Default = No Check
Character.
No Check Character indicates that the imager reads and transmits bar code data with or
without a check character.
When Check Character is set to
Validate and Transmit , the imager will only read Codabar bar
codes printed with a check character, and will transmit this character at the end of the scanned
data.
When Check Character is set to
Validate,
but Don’t Transmit
, the unit will only read Codabar
bar codes printed with a check character, but will not transmit the check character with the
scanned data.
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatenation, the imager looks