C2R 30-005, User Manual

Page: 140 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
140 140
Rev. A
•
Enter : cbrena^.
•
Response : CBRENA1[ACK]
This response indicates that the default setting for Codabar Coding Enable (CBRENA) is 1, or
on.
Example:
Example #3: What is the device’s current setting for Codabar Coding
Enable?
•
Enter : cbrena?.
•
Response : CBRENA1[ACK]
This response indicates that the device’s Codabar Coding Enable (CBRENA) is set to 1, or on.
Example:
Example #4: What are the device’s settings for all Codabar selections?
•
Enter : cbr?.
•
Response : CBRENA1[ACK], SSX0[ACK], CK20[ACK], CCT1[ACK], MIN2[ACK],
MAX60[ACK], DFT[ACK].
This response indicates that the device’s Codabar Coding Enable (CBRENA) is set to 1, or on;
the Start/Stop Character (SSX) is set to 0, or Don’t Transmit; the Check Character (CK2) is set
to 0, or Not Required; concatenation (CCT) is set to 1, or Enabled; the Minimum Message
Length (MIN) is set to 2 characters; the Maximum Message Length (MAX) is set to 60
characters; and the Default setting (DFT) has no value.
Trigger Commands
You can activate and deactivate the imager with serial trigger commands. First, the imager
must be put in Manual/Serial Trigger Mode either by scanning the Manual/Serial Trigger Mode
bar code, or by sending the Manual/Serial Menu Command. Once the imager is in serial trigger
mode, the trigger is activated and deactivated by sending the following commands:
Activate: SYN T CR
ASCII : CHR$(22) + CHR$(84) + CHR$(13)
HEX : 16
– 54 - 0D
Deactivate : SYN U CR
ASCII : CHR$(22) + CHR$(85) + CHR$(13)
HEX : 16
– 55 - 0D
The imager scans until a bar code has been read, until the deactivate command is sent, or
until the serial time-out has been reached (see "Read Time-Out" for a description, and the
serial command ).
Resetting the Custom Defaults
If you aren’t sure what programming options are in your imager, or you’ve changed some
options and want the factory settings restored, scan the
Standard Product Default Settings
bar code below.