C2R 30-005, User Manual

Page: 57 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved
57
Rev. A
0012 A - Code 39 sample length (11) plus CR suffix (1) = 12
41 start character match for Code 39, 41h = “A”
FF termination string for first code
6A code identifier for
Code 128
0013 B - Code 128 sample length (12) plus CR suffix (1) = 13
42 start char
acter match for Code 128, 42h = “B”
FF termination string for second code
69 code identifier for
Code 93
0012 C - Code 93 sample length (11) plus CR suffix (1) = 12
43 start character match for Code 93, 43h = “C”
FF termination string for third code
Output Sequence Editor
Enter Sequence Default Sequence
Partial Sequence
If an output sequence operation is terminated before all your output sequence criteria are met,
the bar code data acquired to that point is a “partial sequence.”
Scan
Discard Partial Sequence to discard partial sequences when the output sequence
operation is terminated before completion. Scan Transmit Partial Sequence to transmit
partial sequences. (Any fields in the sequence where no data match occurred will be skipped
in the output.)
Require Output Sequence
When an output sequence is
Required , all output data must conform to an edited sequence or
the imager will not transmit the output data to the host device. When it’s
On/Not Required ,
the imager will attempt to get the output data to conform to an edited sequence, but if it cannot,
the imager transmits all output data to the host device as is.
When the output sequence is
Off , the bar code data is output to the host as the imager
decodes it.
Note: This selection is unavailable when the Multiple Symbols Selection is turned on.