C2R 30-005, User Manual

Page: 38 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
38 38
Rev. A
Chapter 4
– Output
Power Up Beeper
The scanner can be programmed to beep when it’s powered up. If you are using a cordless
system, the base can also be programmed to beep when it is powered up. Scan the
Off bar
code(s) if you don’t want a power up beep.
Default = Power Up Beeper On - Scanner.
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If you scan
the
Beep on BEL On bar code below, the scanner will beep every time a BEL character is
received from the host.
Default = Beep on BEL Off.
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the Trigger Click On
bar code below. Scan the Trigger Click Off
code if you don’t wish to hear the click. (This
feature has no effect on serial or automatic triggering.)
Default = Trigger Click Off.