C2R 30-005, User Manual

Page: 68 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
68 68
Rev. A
Conversion Chart (Code Page 1252), and nn is the numeric value (00-99) for the
number of times it should be sent.)
•
E9 Send all but the last “nn” characters, starting from the current cursor position.
Syntax = E9nn (nn is the numeric value (00-99) for the number of characters that will
not be sent at the end of the message.)
•
B3 Insert the name of the bar code’s symbology in the output message, without
moving the cursor. Only symbologies with a Honeywell ID are included (see
Symbology Chart . Refer to the ASCII Conversion Chart (Code Page 1252) on page A-
4 for decimal, hex and character codes.
•
B4 Insert the bar code’s length in the output message, without moving the cursor. The
length is expressed as a numeric string and does not include leading zeroes.
Move Commands
•
F5 Move the cursor ahead “nn” characters from current cursor position.
Syntax =
F5nn (nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved ahead.)
•
F6 Move the cursor back “nn” characters from current cursor position.
Syntax = F6nn
(nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved back.)
•
F7 Move the cursor to the beginning of the data string. Syntax = F7 .
•
Move the cursor to the end of the data string. Syntax = EA
Search Commands
•
F8 Search ahead for “xx” character from current cursor position, leaving cursor
pointing to “xx” character.
Syntax = F8xx (xx stands for the hex value for an ASCII
code, see ASCII Conversion Chart (Code Page 1252).
•
F9 Search back for “xx” character from current cursor position, leaving cursor pointing
to “xx” character.
Syntax = F9xx (xx stands for the hex value for an ASCII code, see
ASCII Conversion Chart (Code Page 1252).
• B0 Search forward for “s” string from the current cursor position, leaving cursor
pointing to “s” string. Syntax = B0nnnnS where nnnn is the string length (up to 9999),
and S consists of the ASCII hex value of each character in the match string. For
example, B0000454657374 will search forward for the first occurrence of the 4
character string “Test.” Refer to the
ASCII Conversion Chart (Code Page 1252) on
page A-4 for decimal, hex and character codes.
•
B1 Search backward for “s” string from the current cursor position, leaving cursor
pointing to “s” string. Syntax = B1nnnnS where nnnn is the string length (up to 9999),
and S consists of the ASCII hex value of each character in the match string. For
example, B1000454657374 will search backward for the first occurrence of the 4
character string “Test.” Refer to the
ASCII Conversion Chart (Code Page 1252) on
page A-4 for decimal, hex and character codes
.