C2R 30-005, User Manual

Page: 72 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
72 72
Rev. A
Alternate Data Formats
You can save up to four data formats, and switch between these formats. Your primary data
format is saved under
0 . Your other three formats are saved under 1 , 2 , and 3 . To set your
device to use one of these formats, scan one of the bar codes below.
Single Scan Data Format Change
You can also switch between data formats for a single scan. The next bar code is scanned
using an alternate data format, then reverts to the format you have selected above (either
Primary, 1, 2, or 3).
For example, you may have set your device to the data format you saved as Data Format 3.
You can switch to Data Format 1 for a single trigger pull by scanning the
Single Scan-Data
Format 1 bar code below. The next bar code that is scanned uses Data Format 1, then reverts
back to Data Format 3.