C2R 30-005, User Manual

Page: 43 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved
43
Rev. A
This sets the minimum amount of time before the imager can read another bar code.
Default = No Delay.
User-Specified Good Read Delay
If you want to set your own length for the good read delay, scan the bar code below, then set
the delay (from 0-30,000 milliseconds) by scanning digits from the inside back cover, then
scanning
Save .
Manual/Serial Trigger Modes
Manual Trigger
When in manual trigger mode, the scanner scans until a bar code is read, or until the trigger is
released. Two modes are available,
Normal and Enhanced . Normal mode offers good scan
speed and the longest working ranges (depth of field). Enhanced mode will give you the
highest possi ble scan speed but slightly less range than Normal mode. Enhanced mode is
best used when you require a very fast scan speed and don’t require a long working range.