Burstner I 2012, Instruction Manual

Page: 128 / 292

128
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Electrical system
8
8.8.4 Tank gauge
The water and waste water quantities can be indicated using the tank gauge.
Displays:
„
Press tanks button (Fig. 131,13). The water tank (Fig. 131,7) and waste
water tank (Fig. 131,11) symbols light up. The fill levels of the water tank
(upper scale) and of the waste water tank (lower scale) are indicated using
the LEDs in the gauge.
The table below will help you interpret the levels displayed on the panel.
8.8.5 Alarms
The table below will help you interpret the alarms displayed on the panel.
Current displayed System status "A" ampere symbol
-30 A to -10 A Battery is being heavily
discharged Lights up red
-10 A to -1 A Battery is being dis-
charged Lights up white
0 A Battery current is low or
0 A Lights up white
+1 A to +10 A Battery is being charged Lights up white
Level indicator (blue) 1 LED 2 LEDs 3 LEDs 4 LEDs 5 LEDs 6 LEDs 7 LEDs 8 LEDs
25 % 50 % 75 % 100 %
Z
Perform display checks regularly.
Z
It is best to perform checks in the morning, before the 12 V appliances are
switched on.
Z
Total discharge damages the battery.
Z
If the battery voltage falls below 10.5 V, the battery monitor in the trans-
former/rectifier switches off all the 12 V appliances. The battery cut-off
switch is tripped.