Burstner I 2012, Instruction Manual

Page: 231 / 292

231
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Maintenance
12
12.9.7 Garage light
Halogen bulb 12 V/21 CP
Changing bulbs:
„
Use a suitable tool (e.g. a screwdriver) to carefully lever out the cover
(Fig. 273,2) at the notch (Fig. 273,1) and remove it.
„
Remove halogen bulb.
„
Put in a new halogen bulb.
„
Reassemble the lamp in the reverse order.
12.10 Spare parts
For safety reasons, spare parts for pieces of equipment must correspond with
manufacturer's instructions and be permitted by the manufacturer as a spare
part. These spare parts may only be fitted by the manufacturer or an author-
ised specialist workshop. The authorised dealers and service centres are
available for any spare parts requirement.
Here are some suggestions of important spare parts:
z
Fuses
z
V-belt
z
Windscreen blades
z
Bulbs
z
Water pump (submerged pump)
When ordering spare parts please indicate the chassis number and the vehicle
type to the dealer.
Fig. 273 Garage light
X
Every alteration of the original condition of the vehicle can alter road
behaviour and jeopardize road safety.
X
The special equipment and original spare parts recommended by us
have been specially developed and supplied for your vehicle. These
products are available at the authorised dealer or service centre. The
authorised dealer or service centre is informed about admissible tech-
nical details and carries out the required work correctly.
X
The use of accessories, parts and fittings not supplied by us may cause
damage to the vehicle and jeopardize road safety. Even if an expert's
report, a general type approval or a design certification exists, there is
no guarantee for the proper quality of the product.
X
No liability can be assumed for damage caused by products which have
not been released by us. This also applies to impermissible alterations
to the vehicle.