Burstner I 2012, Instruction Manual

Page: 228 / 292

228
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Maintenance
12
12.9.1 Ceiling lamp
The ceiling lamp has LEDs.
Changing bulbs:
„
Press the two ends (Fig. 265,2) of the spring ring (Fig. 265,1) together and
remove.
„
Remove the housing (Fig. 265,3) with LED from the lamp.
„
Pull out the plug and fully replace the housing with LED.
„
Reassemble the lamp in the reverse order.
12.9.2 Recessed halogen light
Halogen bulb 12 V/10 W
The recessed halogen light (Fig. 266,1) is installed flush.
Changing bulbs:
„
Use a screwdriver to remove the inner cover ring (Fig. 267,1) from the
housing.
„
Use a screwdriver to remove the cover ring with the glass (Fig. 267,2) from
the lower section of the recessed halogen light.
„
Remove halogen bulb (Fig. 267,3).
„
Put in a new halogen bulb.
„
Reassemble the lamp in the reverse order.
Fig. 265 Ceiling lamp
Fig. 266 Recessed halogen light (flat) Fig. 267 Changing the halogen bulb