Burstner I 2012, Instruction Manual

Page: 169 / 292

169
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Appliances
9
„
Press lighting knob (Fig. 180,2). Ignition sparks are generated at the
burner.
„
Once the flame is burning, the control knob must be held down for 10 to
15 seconds, until the thermocouple automatically keeps the gas supply
open.
„
Release the control knob and turn to the desired setting.
Switching off:
„
Turn the control knob to the 0-position. The flame fades.
„
Close the gas isolator tap "Cooker" and the regulator tap on the gas bottle.
Automatic ignition
(without lighting knob)
The gas cooker is equipped with electronic ignition.
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".
„
Open the gas cooker lid.
„
Depending on the model, fold out and lock the flame protection.
„
Turn the control knob (Fig. 181,1) on the burner you wish to use to the igni-
tion position (large flame).
„
Press the control knob down and hold it.
The automatic ignition produces ignition sparks. A clicking noise can be
heard.
„
Once the flame is burning, the control knob must be held down for 10 to
15 seconds, until the thermocouple automatically keeps the gas supply
open.
„
Release the control knob and turn to the desired setting.
Switching off:
„
Turn the control knob to the 0-position. The flame fades.
„
Close the gas isolator tap "Cooker" and the regulator tap on the gas bottle.
9.5.2 Gas oven (Dometic) (special equipment)
Fig. 181 Operating controls for gas
cooker
X
Keep the ventilation openings on the gas oven open at all times.
X
There must be no flammable objects near the gas oven when it is being
lit.
X
If ignition has not taken place, repeat the entire procedure. If necessary,
check if there is gas and/or current in the gas oven.
X
If the gas oven still does not work, close the gas isolator tap and notify
your service centre.