Burstner I 2012, Instruction Manual

Page: 100 / 292

100
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Gas system
7
7.4 Gas isolator taps
A gas isolator tap (Fig. 119) for every gas device is built into the vehicle.
The gas isolator taps are located in the vehicle at different positions, and can
also be fitted separately.
7.5 External gas connection (special equipment)
The external gas connection (Fig. 120) is located at the rear or to the left or
right of the vehicle depending on the model.
Fig. 119 Symbols for the gas isolator
taps
1 Oven
2 Refrigerator
3 Heater/boiler
4 Cooker
X
If the external gas connection is not in use, always close the gas isolator
tap.
X
Only gas appliances with a suitable adapter should be connected to the
external gas connection.
X
Connect only external gas appliances which are designed for an opera-
tion pressure of 30 mbar.
X
Once you have made the connection and opened the gas isolator tap,
make sure that no gas is escaping at the connection point. If there is a
leak in the external gas connection, gas will escape into the open air.
Immediately close the gas isolator tap and the regulator tap on the gas
bottle. Have the external gas connection checked by an authorised spe-
cialist workshop.
X
When connecting an external gas appliance, make sure that there is
nothing near the external gas connection that could cause a spark.
X
Do not use the external gas connection to fill gas bottles. Observe the
information stickers on the external gas connection.
Fig. 120 External gas connection, gas
isolator tap closed