Burstner I 2012, Instruction Manual

Page: 201 / 292

201
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Sanitary fittings
10
„
Put the sewage tank down vertically.
„
Turn the drainage neck upwards.
„
Remove the cap of the drainage neck.
„
Fill the stated amount of sanitary liquid into the sewage tank.
„
Then add enough water to completely cover the bottom of the sewage tank.
„
Close drainage neck with the cap.
„
Return the drainage neck to its original position.
„
Push the sewage tank back to its original position without applying any
force.
„
Ensure that the sewage tank is secured by the retaining clip.
„
Lock the flap for the sewage tank.
Let some water run into the toilet bowl before using the toilet. In order to do so
press the flush button (Fig. 247,3) on the control and operating unit
(Fig. 246,2).
Flushing:
„
Before flushing open the sliding trap of the toilet. For this pull out the slide
lever (Fig. 246,1).
„
For flushing, press the flush button (Fig. 247,3).
„
After flushing close the sliding trap. To do so, push the slide lever back.
The indicator lamp (Fig. 247,2) goes on whenever the sewage tank is filled up
to 3/4.
The indicator lamp (Fig. 247,1) goes on whenever the sewage tank has to be
emptied.
Fig. 244 Turning drainage neck Fig. 245 Filling with sanitary liquid
Fig. 246 Toilet bowl with control and
operating unit
Fig. 247 Control and operating unit
toilet