Burstner I 2012, Instruction Manual

Page: 126 / 292

126
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Electrical system
8
Switching off:
„
Briefly press the 12 V power supply button (Fig. 131,18). The 12 V living
area power supply is switched off. The "12 V power supply" indicator goes
out.
Activating battery
separation (transformer/
rectifier without battery cut-
off switch):
„
Switch off 12 V power supply.
„
Press button for living area battery (Fig. 131,15) and hold it down for
approx. 10 seconds. The "V" volt symbol (Fig. 131,3) and the "12 V" indi-
cator flash three times. The living area battery is disconnected from the
12 V power supply.
Deactivating battery
separation (transformer/
rectifier without battery cut-
off switch):
„
Press the 12 V power supply button (Fig. 131,18) and hold it down for
approx. 5 seconds. The "V" volt symbol (Fig. 131,3) and the "12 V" indi-
cator flash three times. The living area battery is connected to the 12 V
power supply. The indicator lights up after approx. 5 seconds.
8.8.3 Batteries gauge
The voltage and charging/discharging of the living area battery or the starter
battery voltage can be indicated using the batteries gauge.
Displays:
„
Press button for living area battery (Fig. 131,15). The "V" volt symbol
(Fig. 131,3) lights up. Depending on whether the battery is being charged
or discharged, the "A" ampere symbol (Fig. 131,17) lights up white or red
respectively. The battery voltage and current of the living area battery are
displayed using the LEDs in the gauge.
„
Press button for starter battery (Fig. 131,14). The "V" volt symbol
(Fig. 131,3) lights up. The battery voltage of the starter battery is displayed
using the LEDs in the gauge.
The tables below will help you interpret the statuses displayed on the panel.
Z
If, after switching on, the "11.0" LED of the volt indicator and the "V" volt
symbol (Fig. 131,3) in the batteries gauge (Fig. 131,2) flash, the voltage of
the living area battery is too low. Charge battery.
Z
If, after switching on, the "12 V" indicator and the "V" volt symbol
(Fig. 131,3) flash three times, battery separation is activated. Deactivate
battery separation.
Z
When leaving the vehicle, switch off the main 12 V power supply at the
panel. This prevents any unnecessary discharge of the living area battery.
Z
Appliances, such as control units (e.g. solar charge regulator, defroster or
panel) or fitted appliances (e.g. heating, refrigerator or step) continue to
take power from the battery capacity, even if the 12 V power supply on the
panel is switched off. Therefore disconnect the living area battery from the
12 V power supply via the switch on the transformer/rectifier if the vehicle
will not be used for a long period of time.
Volt indicator (blue) 1 LED 2 LEDs 3 LEDs 4 LEDs 5 LEDs 6 LEDs 7 LEDs 8 LEDs
< 11.0 V 11.5 V 12.0 V 12.2 V 12.5 V 12.7 V 13.0 V > 13.5 V