Burstner I 2012 Instruction Manual Download Page 197

Page: 197 / 292

197

I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN

Sanitary fittings

Fill the Thetford cassette with the specified quantity of sanitary liquid.

Then add enough water to completely cover the bottom of the Thetford cas-
sette.

Close drainage neck with the cap.

Return the drainage neck to its original position.

Push the Thetford cassette back to its original position.

Ensure that the Thetford cassette is secured by the retaining clip.

Lock the flap for the Thetford cassette.

Fig. 232 Filling with sanitary liquid

When inserting, do not use force. The Thetford cassette can be damaged.

Fig. 233 Inserting the Thetford cassette

Fig. 234 Thetford cassette secured

Summary of Contents for I 2012





































































































































































































































































































Search results

Summary of Contents for I 2012

Reviews:

Related manuals for I 2012

Brands by name

Popular brands

Burstner I 2012, Instruction Manual

Search results

Summary of Contents for I 2012

Reviews:

Related manuals for I 2012

Brands by name

Popular brands