Bulldog Security DELUXE 200, Installation And Owner'S Manual

Page: 10 / 22

‘ ‘
‘ ‘
35 10
IMPORTANT OWNER’S NOTICE
WARNINGS:
As with any product that performs automatic functions, there are certain
safety precautions that you must
practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or
garage.
5. Always apply the parking brake and lock the vehicle as you exit the
vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is
corrected.
8. The use and operations of this system is the sole responsibility of the
operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle
running on public streets.
10. Do not start the vehicle by remote while the standard transmission
vehicle is parked on a steep road.
2. Twist upper wires together, twist lower wires together as shown.
4. Use electrical tape to wrap, be sure to cover about 2 inches on either side
of connection. Secure with wire ties as shown.
Wire Wire TTie ie
Electrical Electrical TTape ape
Wire Wire TTie ie
3. Lay upper twisted pair of wires over right wire as shown. Bring lower twisted
pair of wires up to meet the left wire as shown.
1. When tying two separate wires together at their ends, strip back 1” of insulation
on both wires and separate the strands of wire as shown below.
MAKING WIRING CONNECTIONS