21
24
FEATURE #II PROGRAMMING CHART
One Chirp with
Press
One LED Pulse
Transmitter Factory Default
Two Chirps with
Three Chirps with
Button
Setting
Two LED Pulses
Three LED Pulses
1
Pathway illumination Parking light turns on Parking light turns on
feature off
for 30 seconds upon
for 30-seconds upon an
an unlock signal
unlock signal & 10-
seconds upon a lock
signal
2
Constant parking
Flashing parking light
light output
output
3
Brown/Black Wire=
Brown/Black Wire=
Security Rearm Signal Ground Output during
Output
start (crank)
4
Lt. Green/Black wire= Lt. Green/Black Wire= Lt. Green/Black Wire=
Dual pulse door
Factory security disarm Start status output
unlock output
signal output
(shock sensor bypass)
PROGRAMMING
Exit:
Turn Ignition to
ON
position, or leave it for 15 seconds. (3) long
horn chirps and (3) parking light flashes will confirm exit.
FEATURE II PRORAMMING:
1. Turn the Ignition switch
ON/OFF (3) TIMES
and leave in the
OFF
position.
2. Push the Program switch (4) times and hold in on the 4
th
push until (2)
chirps with a long chirp is heard then release the Program switch. You
are now in the feature
II
programming mode.
3. Press and release the transmitter button that corresponds to the feature
you desire to program.
WIRING CONNECTIONS
VACUUM OPERATED
DOOR LOCKING
SYSTEM: TYPICAL OF
MERCEDES BENZ AND
AUDI.
Locate the wire under
the driver's kick
panel. Use the
voltmeter connecting
to ground, verify that
you have the correct wire with the doors unlocked, the voltmeter will
receive "12 volts"
. Lock the doors and the voltmeter will read
"0 volt"
.
Move the alligator clip to +12V and the voltmeter will receive
"12
volts"
.
Cut this wire and make connections. Be sure to program door lock timer to
3.5 seconds. (See Feature
I 2
Programming.)
Summary of Contents for DELUXE 200
Page 1: ......
