20
25
PROGRAMMING
FEATURE #III PROGRAMMING CHART
One Chirp with
Press
One LED Pulse
Transmitter Factory Default Two Chirps with
Three Chirps with Four Chirps with
Button
Setting
Two LED Pulses
Three LED Pulses Four LED Pulses
1
Gasoline
N/A
N/A
N/A
Engine
2
20 minute
30 minute
5 minute
10 minute
run time
run time
run time
run time
3
Factory alarm Without this
disarm with
feature
all output
channels
4
3 Hour Time
2 Hour Time
Start
Start
FEATURE III PRORAMMING:
1. Turn the Ignition 'switch
ON
/
OFF
(3)
TIMES
and leave in the
OFF
position.
2. Push the Program switch (6) times and hold in on the 6th
push until
(3) chirps with a long chirp is heard then release the Program switch.
You are now in the feature
III
programming mode.
3. Press and release the transmitter button that corresponds to the feature
you desire to program.
Exit:
Turn Ignition to
ON
position, or leave it for 15 seconds. (3) long
horn chirps and (3) parking light flashes will confirm exit.
WIRING CONNECTIONS
6-PIN DOOR LOCK CONNECTOR:
Summary of Contents for DELUXE 200
Page 1: ......
