Copying from a USB Device
Use Direct Copy to copy from a USB device directly to the LinkStation.
Supported Devices:
• USB mass storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
Configuring Direct Copy
1
From Advanced Settings, click
Backup
.
2
Move the Direct Copy switch to the
position to enable Direct Copy.
To change the Direct Copy target folder, navigate to
Backup
>
Direct Copy
>
Edit
, select a new folder, and click
OK
.
Starting Direct Copy
1
Connect the USB device. When it mounts (about 10 seconds), the function LED will light up.
Notes:
• Devices that don’t trigger the function LED to light up are not supported.
• When you connect PTP devices, the function LED may not light up. In such case, disconnect the PTP device
from the LinkStation once, then reconnect it.
2
You now have 60 seconds to press the function button once. If you do, the function LED will flash as all the files
on the USB device are copied to the Direct Copy folder of the LinkStation.
Notes:
• While the function LED is flashing, press the function button once to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
69
Chapter 6 Backup
Summary of Contents for LinkStation 200B
