only one bus-powered drive at a time. If there is insufficient bus power for your USB drive, connect its AC adapter.
Note that only the first partition of a connected USB drive is mounted. Additional partitions are not recognized.
Dismounting Drives
If the LinkStation is powered on, dismount drives (internal and external) before unplugging them. You may
dismount external drives using the function button, or dismount any drive from Settings. If the LinkStation is off,
then all drives are already dismounted and may be unplugged safely.
Note:
If you unplug your external drives without dismounting them, Settings may still show “usbdisk” in the shared
folder list. Reboot your LinkStation to clear it.
Dismounting with the Function Button
Press and hold the function button for three seconds. The white function LED will go out as all attached USB drives
are dismounted. You may now unplug them safely.
Dismounting from Settings
1
From Advanced Settings, click
Drives
.
2
Click
Drives
to dismount an internal drive or
USB Drives
to dismount an external drive.
3
Select the drive to dismount and click
Dismount Disk
.
4
The “Confirm Operation” screen will open. Enter the confirmation number, then click
OK
.
41
Chapter 4 Storage Management
Summary of Contents for LinkStation 200B
