6
LAN Port
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
7
Link and Activity LED
This LED shows network activity. It blinks green when the LinkStation is accessed over the network.
8
Power Connector
Use the included power cable to connect to a surge protector or outlet.
9
Power Status LED
The LED glows green when the power cable is connected.
10
Fan
Do not block the fan.
11
Anti-Theft Security Slot
Use this slot to secure your LinkStation with a cable lock (not included).
12
Drive 1 Error LED
If there is an error on drive 1, this LED will light.
13
Drive 2 Error LED
If there is an error on drive 2, this LED will light.
Turning the LinkStation On and Off
Move the power switch on the back of the LinkStation to the
on
position to turn it on. To turn it off, move the switch
to the
off
position and wait for the unit to fully shut down before unplugging it. Never unplug the AC adapter
without properly shutting down the LinkStation first.
When all the LEDs on the front of the LinkStation turn off, the shutdown process is complete.
9
Chapter 1 Getting Started
Summary of Contents for LinkStation 200B
