3
Choose a RAID array.
4
Select a RAID mode and the drives to be used, then click
Create RAID Array
.
5
The “Confirm Operation” screen will open. Enter the confirmation number, then click
OK
.
6
Click
OK
when completed. Next, create a shared folder by referring to the
section in
chapter 3.
Note:
Normally, after a RAID array is created, it is “resynced”, which optimizes the array and makes it more stable.
The resyncing process will take about one hour per terabyte of space in the array. File transfers will be slower during
this period, but the array will remain fully usable. The I17 message will also be displayed in NAS Navigator2 during
the resync. If you clear the “Resync after creating the RAID array” checkbox, the resync process will be skipped. If the
LinkStation is rebooted during the resync process, resyncing will begin again from the beginning.
37
Chapter 4 Storage Management
Summary of Contents for LinkStation 200B
