: Read and write
: Read-only
: No access
7
Click
OK
.
Notes:
• The example above shows configuring access restrictions for users. To configure access restrictions for groups,
click the
Local Groups
tab and select group permissions.
• If both read-only and read and write permissions are given to a user, the user will have read-only access.
Active Directory
If there is an Active Directory environment, the LinkStation will use account information from the Active Directory
domain controller to set access restrictions for LinkStation’s shared folders. There is no need to perform individual
account management for the LinkStation. If multiple LinkStations are installed on the network, the account
information is centrally managed in Active Directory, greatly reducing the operations required for installation and
management.
Note:
The LinkStation supports a domain environment with a maximum 1000 users and 1000 groups.
1
From Advanced Settings, click
Network
.
2
Click
to the right of “Workgroup/Domain”.
3
Click
Edit
.
26
Chapter 3 File Sharing
Summary of Contents for LinkStation 200B
