Buderus Logano plus GB402 Installation And Maintenance Instructions Manual Download Page 9

Page: 9 / 76

Information about the appliance

Logano plus GB402 - Subject to technical modifications!

2.6

Standard delivery

The Logano plus GB402 is supplied as standard with a
Logamatic BC10 base controller and the MC10 control
unit in 3 separate packages.

Upon receipt, check that all packaging is in perfect
condition.

Check the delivery for completeness.

Dispose of packaging in an environmentally
responsible manner.

Accessories

Many individual accessories are available for this boiler.
For details regarding suitable accessories, see the
catalogue.

The following accessories are available from your local
sales office:

• Safety valve or safety assembly
• Flue gas system
• Ventilation air system
• Programming unit, e.g. RC35
• Silencer
• Ventilation air adaptor (accessory for balanced flue

operation)

Packing
unit

Component

Packaging

1 (boiler)

Assembled boiler
(excluding casing)

1 shrink-wrap
package
on a pallet

Siphon

1 shrink-wrap
package

Adjustable feet

1 shrink-wrap
package

Boiler flue connection 1 carton

Labelgas type
conversion

1 shrink-wrap
package

Technical
documentation

1 shrink-wrap
package

2 (separate)

Casing

1 carton

3 (separate)

MC10 control unit
(including BC10)

1 carton

Tab. 2

Standard delivery

Summary of Contents for Logano plus GB402













































































Search results

Summary of Contents for Logano plus GB402

Reviews:

Related manuals for Logano plus GB402

Brands by name

Popular brands

Buderus Logano plus GB402, Installation And Maintenance Instructions Manual

Search results

Summary of Contents for Logano plus GB402

Reviews:

Related manuals for Logano plus GB402

Brands by name

Popular brands