Buchi Pure C-810 Operation Manual Download Page 28

Page: 28 / 102

5 | Installation

Büchi Labortechnik AG

28/102

Operation Manual Pure Chromatography Instruments

5.9

Installing the exhaust (ELSD only)

Press the exhaust gas hose (2) on the
exhaust (1).

5.10

Assembling the waste bottle

NOTICE

Waste bottle on top of the instrument

Waste bottle on top of the instrument can cause property damages.

Make sure that there is a decline between the connection on the instrument and
the waste bottle.

Put the waste line into the waste bottle.

5.11

Installing the waste level sensor

Precondition:

Make sure that the instrument is not
connected to the power supply.

Attach the waste level sensor to the
instrument. Connections see
Chapter 3.2.4 "Connections on gradient
valve", page 17

Calibrate the waste level sensor. See
Chapter 5.12 "Calibrating the waste
level sensor", page 29

All manuals and user guides at all-guides.com

Summary of Contents for Pure C-810







































































































Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands

Buchi Pure C-810, Operation Manual

Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands