Buchi Pure C-810 Operation Manual Download Page 39

Page: 39 / 102

Büchi Labortechnik AG

Operation | 6

Operation Manual Pure Chromatography Instruments

39/102

6.1.6

Gradient panel

Edit the gradient and see separation details.

NOTE

According to the instrument status different options are available.

Action

Option

Explanation

[Table]

Create a gradient

See Chapter "Editing the gradient in
tabular mode", page 46

[Navigator]

Finding out Flash sepa-
ration conditions

See Chapter 10.3 "Finding out sepa-
ration conditions with the navigator",
page 97

[UV scan details]

View

Shows the following charts:

3D (UV / Time/ Wavelength)

2D (Time / Wavelength)

Absorption maxima

All scan maxima

[Zoom]

Function

Zoom the graph.

[Options]

Select values

Graph options.

[Edit]

Select between the op-
tions

The graph is in edit mode. See Chap-
ter "Editing the gradient in graphic
mode", page 47

[View]

The graph is in view mode.
(No changes possible)

[Zoom]

Zoom the graph.

All manuals and user guides at all-guides.com

Summary of Contents for Pure C-810







































































































Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands

Buchi Pure C-810, Operation Manual

Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands