Buchi Pure C-810 Operation Manual Download Page 25

Page: 25 / 102

Büchi Labortechnik AG

Installation | 5

Operation Manual Pure Chromatography Instruments

25/102

5.4

Establishing electrical connections

NOTE

Observe the legal requirements when connecting the instrument to the power
supply.

Use additional electrical safety features (e.g., residual-current circuit breakers) to
comply with local laws and regulations.

The power supply must fulfil the following conditions:
1. Provide the mains voltage and frequency specified on the type plate of the

instrument.

2. Be designed for the load imposed by the instruments connected.

3. Be equipped with suitable fuses and electrical safety features.

4. Be equipped with proper earthing.

NOTICE

Risk of property damage and diminished performance due to use of unsuitable
power cables.

The power supply cables supplied with the product by BUCHI precisely match the
requirements of the device. If other power cables that do not meet those
requirements are used, the device may be damaged and/or its performance
diminished.

Use only the power supply cables supplied with the product or ordered
separately from BUCHI.

If using any other power supply cables, make sure that they match the
specifications on the type plate.

Make sure that all connected devices are earthed.

Plug the power cable into the connection on the instrument. See Chapter 3.2
"Configuration", page 14

Plug the mains plug into the mains outlet socket.

5.5

Establishing solvent connection

NOTICE

Solvent bottles on top of the instrument.

Solvent bottles on top of the instrument can cause property damages.

Locate the solvent bottles next to the instrument.

Use the optional solvent bottle platform.

All manuals and user guides at all-guides.com

Summary of Contents for Pure C-810







































































































Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands

Buchi Pure C-810, Operation Manual

Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands