Buchi Pure C-810 Operation Manual Download Page 72

Page: 72 / 102

6 | Operation

Büchi Labortechnik AG

72/102

Operation Manual Pure Chromatography Instruments

6.10.2 Sending data to USB

Navigation path

➔

Run panel

Precondition:

The instrument is in past run mode.

Connect a USB storage device to the instrument.

Navigate to the

Run

panel according the navigation path.

Tap the button

[Data to USB]

The instrument saves an Excel file to the USB storage device.

Confirm the complete message.

The data is stored.

6.10.3 Sending PDF to USB

Navigation path

➔

Run panel

Precondition:

The instrument is in past run mode.

Connect a USB storage device to the instrument.

Navigate to the

Run

panel according the navigation path.

Tap the button

[PDF to USB]

The instrument saves a PDF file to the USB storage device.

Confirm the complete message.

The data is saved.

All manuals and user guides at all-guides.com

Summary of Contents for Pure C-810







































































































Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands

Buchi Pure C-810, Operation Manual

Search results

Summary of Contents for Pure C-810

Reviews:

Related manuals for Pure C-810

Brands by name

Popular brands