btsr IS3W/MTC, Operating Manual

Page: 55 / 89

Operation
SMART 200 MTC -3.41 -
TARGET Creating a New Article
Target setting
SETUP NEW TARGET
This function allows you to setup the TARGET, i.e. the number of yarn meters to
collect. When reaching the Target, the position will stop and a signal will be sent
through the Stop output, with the characteristics defined by the STG-XX parameter
in the CONFIG menu.
Once the Target is reached, the counter will be reset either manually or
automatically depending on the RES-M/A parameter setting in the CONFIG menu.
Once you have selected the TARGET function from NEW menu, press to
have access to the function.
Set the desired value using , and .
Increment by 1
Decrement by 1
( hold down ) Continuous increment
( hold down ) Continuous decrement
+ ( hold down ) Fast increment
+ ( hold down ) Fast decrement
Confirm the set value
Clears the set value, restores the previous value and returns to the
>TARGET screen.
Once you have setup the desired value, press to select the next parameter
( K_%)
B
1