btsr IS3W/MTC, Operating Manual

Page: 46 / 89

Operation
- 3.32 - SMART 200 MTC
HH : MM = Read values; (HH = hours, MM = minutes)
hh : mm = New values ( if needed )
Increases the value pointed by the cursor.
Decreases the value pointed by the cursor.
Alternatively selects hh and mm fields.
Confirms the set values.
If the printer is not connected correctly, the ERR-COM PRINTER message will
appear. For further details, please refer to Chapter 4 “Troubleshooting”.
TimePR: Reading the times set for the automatic printout of
Production Report
Once you have selected the TimePR function from CLOCK menu, press to
have access to the function.
N
progressive number within the set time table
(1 to 4 )
HH : MM = Read values; (HH = hours, MM = minutes)
-- : -- = New values
Press to display the next value; after the fourth value, the firs one will re-
appear.
Press twice to leave the function and return to the CLOCK menu without
saving the values ( being a read only operation )
TimePR: Adding a time for the automatic printout of
Production Report
( only if at least one empty field exists )
Once you have selected the TimePR function from CLOCK menu, press to
have access to the function.
Press to select the first empty field (N# --:--)
Press to activate the function, then press and hold down for 3 seconds.