BTR DG-Mini, Manual

Page: 32 / 71

BTR Controls, Inc.
PROGRAMMING
DG-Mini V7 Rev. C Standard HW manual V 1.0.2 32
SYSTEM STATUS
(CONTINUED)
Description:
Outputs
Displays the current state of the controller’s outputs.
Active inputs are indicated by a filled box.
Fault Log
A Log of the last 10 errors.
Displays the Error code and the door operation cycle it occurred on.
Use the
UP or DOWN buttons to navigate through the log.
Cycle Counter
Displays the total number of door cycles.
Open / Close = 1 Cycle.
Temperature
Displays the internal temperature of the controller.
Note this is a raw analog value from inside of the controller and is
not
shown as °C / °F.
DC Link
Displays the current internal DC Link voltage and the range it should be
within.
Internal Levels
Displays the controller’s internal supply voltages.
The Internal 12V supply should be /- 1V and the internal 24V
supply should be in the rage of 20-24V.
P
ROFILE
S
ELECTION
Description:
To simplify installation the DG-Mini contains preset
defaults called profiles. Each profile contains the
manufacturer’s recommended initial settings for a
particular door model. The profiles allow an
installer to quickly set up a door.
After a profile has been loaded the controller can
be further adjusted to meet a specific customer’s
requirements as needed. (Such as timer settings,
input configurations and other options)
CAUTION
Loading a profile will cause
all related parameters to
be overwritten with the
defaults of the loaded
profile!